Over 500 CompTIA Network+ N10-007 Exam Questions and Answers

Question 301: A technician is replacing a switch at a branch office and discovers the existing backbone cable does not fit in the new switch. The fiber patch panel has circular connections. The new switch has a transceiver that accepts a smaller square adapter of two strands. Which of the following patch cables would the technician need to complete the installation?

A. LC to SC
B. SC to ST
C. LC to ST
D. ST to ST
E. SC to SC

Question 302: A computer lab on a campus network was recently reconfigured using recycled network cables. One of the 24 computers in the lab is unable to connect to the network after the upgrade. A network technician successfully uses the cable in question to connect directly to another computer. Which of the following is MOST likely the issue with the cable?

A. The cable is a crossover cable
B. The cable is a rollover cable
C. The cable has bent pins
D. The cable is a Cat 5 cable

Question 303: A technician is upgrading the firmware on an older KVM switch. The specifications call for a serial port to connect to the computer on one side, and an Ethernet jack to connect to the switch on the other side. Which of the following connectors does the technician need for this cable? (Choose two.)

A. RG-9
B. DB-9
C. RJ-11
D. DB-25
E. RJ-45

Question 304: An end-user device requires a specific IP address every time it connects to the corporate network; however, corporate policy does not allow the use of static IP addresses. Which of the following will allow the request to be fulfilled without breaking the corporate policy?

A. DHCP relay
B. DHCP exclusion
C. DHCP option
D. DHCP reservation

Question 305: A technician is planning a remote-access strategy to manage routers and switches on a dedicated management network. The management network is segregated from the production network and uses site-to-site VPN connections. Some of the equipment does not support encryption. Which of the following should the technician choose that all the equipment would support?

A. Telnet
D. IPSec

Question 306: A systems administrator has recently purchased and installed a large electronic signage screen for the company’s parking garage. The screen’s management software was installed on a server with a public IP address to allow remote management. The systems administrator is now troubleshooting an issue with the screen displaying unknown, random, and inappropriate messages. Which of the following is MOST effective in resolving this issue?

A. Changing the management software’s default credentials
B. Disabling unnecessary services from the server and management software
C. Changing the management software’s default port
D. Replacing the management software’s self-signed certificate with a valid certificate

Question 307: A technician must determine if a web page user’s visits are connecting to a suspicious website’s IP address in the background. Which of the following tools would provide the information on TCP connections?

A. netstat
B. tracert
C. arp
D. ipconfig
E. route

Question 308: As part of a transition from a static to a dynamic routing protocol on an organization’s internal network, the routing protocol must support IPv4 and VLSM. Based on those requirements, which of the following should the network administrator use? (Choose two.)

C. RIPv1

Question 309: A company has contracted with an outside vendor to perform a service that will provide hardware, software, and procedures in case of a catastrophic failure of the primary datacenter. The Chief Information Officer (CIO) is concerned because this contract does not include a long-term strategy for extended outages. Which of the following should the CIO complete?

A. Disaster recovery plan
B. Business continuity plan
C. Service level agreement
D. First responder training

Question 310: Users are reporting their network is extremely slow. The technician discovers pings to external host have excessive response times. However, internal pings to printers and other PCs have acceptable response times. Which of the following steps should the technician take NEXT?

A. Determine if any network equipment was replaced recently
B. Verify malware has not disabled the users’ PC firewalls
C. Replace users’ network cables with known-good network cables
D. Power cycle the web server

Published by Thomas Apel

, a dynamic and self-motivated information technology architect, with a thorough knowledge of all facets pertaining to system and network infrastructure design, implementation and administration. I enjoy the technical writing process and answering readers' comments included.