The latest Huawei Certified ICT Associate HCIA Routing & Switching H12-211 actual real practice exam question and answer (Q&A) dumps are available free, which are helpful for you to pass the Huawei Certified ICT Associate HCIA Routing & Switching H12-211 exam.
Exam Question 111
Refer to the debug output. Following configuration of R2, the administrator discovers that the behavior is not as expected and performs debugging. Based on the output from the debug, what is the source of the problem?
A. R2 has configured an ACL to block the route to network 1.0.0.0
B. R2 has enabled split horizon.
C. R1 is using authentication, however R2 is not.
D. R2 is operating using RIPv2, while R1 is using RIPv1.
Correct Answer:
D. R2 is operating using RIPv2, while R1 is using RIPv1.
Exam Question 112
When a network administrator configures STP in the network, BPDU begin to be sent by switch. Which of the following statements regarding the BPDU frame are correct?
A. A BPDU uses the IEEE 802.3 standard frame type
B. A BPDU uses the Ethernet II standard frame type
C. The BPDU frame’s control field is 3
D. The destination MAC address field of a BPDU frame is a broadcast address
Correct Answer:
A. A BPDU uses the IEEE 802.3 standard frame type
Exam Question 113
In the case of Huawei router, the Tracert command uses UDP to encapsulate probe packets.
A. True
B. False
Correct Answer:
A. True
Exam Question 114
The broadcast address of the subnet 192.168.1.0/25 is 192.168.1.128.
A. True
B. False
Correct Answer:
B. False
Exam Question 115
A network administrator wishes to assign an IP address to a router interface G0/0/0. Which of the following IP addresses can be assigned?
A. 192.168.10.112/30
B. 237.6.1.2/24
C. 145.4.2.55/26
D. 127.3.1.4/28
Correct Answer:
C. 145.4.2.55/26
Exam Question 116
In the VRP system, what are the functions of Ctrl+Z?
A. Return from the system view to the user view
B. Exit from the current view
C. Exit from the interface view
D. Exit from the console interface view
E. Return to the user view
Correct Answer:
A. Return from the system view to the user view
Exam Question 117
Assuming all STP enabled switches have the same bridge priority. The MAC address of switch A is 00-e0-fc-00-00-40, the MAC address of switch B is 00-e0-fc-00-00-10, the MAC address of switch C is 00-e0-fc-00-00-20, and the MAC address of switch D is 00-e0-fc-00-00-80.
Which switch will be elected as the root switch?
A. Switch A
B. Switch B
C. Switch C
D. Switch D
Correct Answer:
B. Switch B
Exam Question 118
As specified by the RSTP protocol, when a root port fails, which type of port will function as a new root port and enters the forwarding state without any delay?
A. Forwarding Port
B. Alternate Port
C. Backup Port
D. Edge Port
Correct Answer:
B. Alternate Port
Exam Question 119
Refer to the graphic. RTA and RTB are running RIPv1. RTA has advertised 10.0.0.0 and 192.168.1.0 to the RIP network. Which routes will exist in the IP routing table of RTB? (Choose all that apply)
A. 10.0.0.0/8
B. 192.168.1.1/32
C. 10.1.12.1/32
D. 192.168.1.0/24
Correct Answer:
A. 10.0.0.0/8
D. 192.168.1.0/24
Exam Question 120
Refer to the graphic. An administrator has configured RIPv2 in the two routers. What will happen after configuring the following commands: (Choose all that apply)
A. RTA will have the route learned from the RTB
B. RTB will have the route learned from the RTA
C. RTA will have no neighbor relationship with RTB
D. RTB will have no neighbor relationship with RTA
Correct Answer:
A. RTA will have the route learned from the RTB
D. RTB will have no neighbor relationship with RTA