The latest Cisco CCNP and CCIE Enterprise Core: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) 350-401 certification actual real practice exam question and answer (Q&A) dumps are available free, which are helpful for you to pass the Cisco CCNP and CCIE Enterprise Core: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) 350-401 exam and earn Cisco CCNP and CCIE Enterprise Core: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) 350-401 certification.
Exam Question 51
Which behavior can be expected when the HSRP version is changed from 1 to 2?
A. No changes occur because the standby router is upgraded before the active router.
B. No changes occur because version 1 and 2 use the same virtual MAC OUI.
C. Each HSRP group reinitializes because the virtual MAC address has changed.
D. Each HSRP group reinitializes because the multicast address has changed.
Correct Answer:
C. Each HSRP group reinitializes because the virtual MAC address has changed.
Exam Question 52
Refer to the exhibit.
Which IP address becomes the active next hop for 192.168.102.0/24 when 192.168.101.2 fails?
A. 192.168.101.10
B. 192.168.101.14
C. 192.168.101.6
D. 192.168.101.18
Correct Answer:
D. 192.168.101.18
Exam Question 53
Which PAgP mode combination prevents an EtherChannel from forming?
A. auto/desirable
B. desirable/desirable
C. desirable/auto
D. auto/auto
Correct Answer:
D. auto/auto
Exam Question 54
If a VRRP master router fails, which router is selected as the new master router?
A. router with the lowest priority
B. router with the highest priority
C. router with the highest loopback address
D. router with the lowest loopback address
Correct Answer:
B. router with the highest priority
Exam Question 55
Refer to the exhibit.
VLANs 50 and 60 exist on the trunk links between all switches. All access ports on SW3 are configured for VLAN 50 and SW1 is the VTP server.
Which command ensures that SW3 receives frames only from VLAN 50?
A. SW1(config)#vtp mode transparent
B. SW3(config)#vtp mode transparent
C. SW2(config)#vtp pruning
D. SW1(config)#vtp pruning
Correct Answer:
D. SW1(config)#vtp pruning
Exam Question 56
Which First Hop Redundancy Protocol maximizes uplink utilization and minimizes the amount of configuration that is necessary?
A. GLBP
B. HSRP v2
C. VRRP
D. HSRP v1
Correct Answer:
A. GLBP
Exam Question 57
Refer to the exhibit.
Which configuration establishes EBGP neighborship between these two directly connected neighbors and exchanges the loopback network of the two routers through BGP?
A. R1(config)#router bgp 1
R1(config-router)#neighbor 192.168.10.2 remote-as 2
R1(config-router)#network 10.1.1.0 mask 255.255.255.0
R2(config)#router bgp 2
R2(config-router)#neighbor 192.168.10.1 remote-as 1
R2(config-router)#network 10.2.2.0 mask 255.255.255.0
B. R1(config)#router bgp 1
R1(config-router)#neighbor 10.2.2.2 remote-as 2
R1(config-router)#network 10.1.1.0 mask 255.255.255.0
R2(config)#router bgp 2
R2(config-router)#neighbor 10.1.1.1 remote-as 1
R2(config-router)#network 10.2.2.0 mask 255.255.255.0
C. R1(config)#router bgp 1
R1(config-router)#neighbor 192.168.10.2 remote-as 2
R1(config-router)#network 10.0.0.0 mask 255.0.0.0
R2(config)#router bgp 2
R2(config-router)#neighbor 192.168.10.1 remote-as 1
R2(config-router)#network 10.0.0.0 mask 255.0.0.0
D. R1(config)#router bgp 1
R1(config-router)#neighbor 10.2.2.2 remote-as 2
R1(config-router)#neighbor 10.2.2.2 update-source lo0
R1(config-router)#network 10.1.1.0 mask 255.255.255.0
R2(config)#router bgp 2
R2(config-router)#neighbor 10.1.1.1 remote-as 1
R2(config-router)#neighbor 10.1.1.1 update-source lo0
R2(config-router)#network 10.2.2.0 mask 255.255.255.0
Correct Answer:
A. R1(config)#router bgp 1
R1(config-router)#neighbor 192.168.10.2 remote-as 2
R1(config-router)#network 10.1.1.0 mask 255.255.255.0
R2(config)#router bgp 2
R2(config-router)#neighbor 192.168.10.1 remote-as 1
R2(config-router)#network 10.2.2.0 mask 255.255.255.0
Exam Question 58
Which reason could cause an OSPF neighborship to be in the EXSTART/EXCHANGE state?
A. mismatched OSPF link costs
B. mismatched OSPF network type
C. mismatched areas
D. mismatched MTU size
Correct Answer:
D. mismatched MTU size
Exam Question 59
When configuring WPA2 Enterprise on a WLAN, which additional security component configuration is required?
A. PKI server
B. NTP server
C. RADIUS server
D. TACACS server
Correct Answer:
C. RADIUS server
Exam Question 60
A customer has several small branches and wants to deploy a Wi-Fi solution with local management using CAPWAP.
Which deployment model meets this requirement?
A. local mode
B. autonomous
C. SD-Access wireless
D. Mobility Express
Correct Answer:
D. Mobility Express