The latest Cisco Certified Network Associate 200-301 CCNA certification actual real practice exam question and answer (Q&A) dumps are available free, which are helpful for you to pass the Cisco Certified Network Associate 200-301 CCNA exam and earn Cisco Certified Network Associate 200-301 CCNA certification.
Exam Question 591
An engineer must configure interswitch VLAN communication between a Cisco switch and a third-party switch. Which action should be taken?
A. configure DSCP
B. configure IEEE 802.1q
C. configure ISL
D. configure IEEE 802.1p
Correct Answer:
B. configure IEEE 802.1q
Answer Description:
VLAN trunking offers two options, ISL and 802.1Q. ISL is Cisco proprietary while 802.1Q is standards based and supported by multiple vendors.
Exam Question 592
An engineer requires a switch interface to actively attempt to establish a trunk link with a neighbor switch.
What command must be configured?
A. switchport mode trunk
B. switchport mode dynamic desirable
C. switchport nonegotiate
D. switchport mode dynamic auto
Correct Answer:
B. switchport mode dynamic desirable
Exam Question 593
Refer to the exhibit. After the election process, what is the root bridge in the HQ LAN?
Switch 1: 0C:E0:38:81:32:58
Switch 2: 0C:0E:15:22:1A:61
Switch 3: 0C:0E:15:1D:3C:9A
Switch 4: 0C:E0:19:A1:4D:16
A. Switch 1
B. Switch 2
C. Switch 3
D. Switch 4
Correct Answer:
C. Switch 3
Exam Question 594
An engineer must establish a trunk link between two switches. The neighboring switch is set to trunk or desirable mode. What action should be taken?
A. configure switchport nonegotiate
B. configure switchport mode dynamic desirable
C. configure switchport mode dynamic auto
D. configure switchport trunk dynamic desirable
Correct Answer:
C. configure switchport mode dynamic auto
Exam Question 595
Which spanning-tree enhancement avoids the learning and listening states and immediately places ports in the forwarding state?
A. BPDUfilter
B. PortFast
C. Backbonefast
D. BPDUguard
Correct Answer:
B. PortFast
Exam Question 596
How does the dynamically-learned MAC address feature function?
A. The CAM table is empty until ingress traffic arrives at each port
B. Switches dynamically learn MAC addresses of each connecting CAM table.
C. The ports are restricted and learn up to a maximum of 10 dynamically-learned addresses
D. It requires a minimum number of secure MAC addresses to be filled dynamically
Correct Answer:
A. The CAM table is empty until ingress traffic arrives at each port
Exam Question 597
When using Rapid PVST+, which command guarantees the switch is always the root bridge for VLAN 200?
A. spanning-tree vlan 200 priority 614440
B. spanning-tree vlan 200 priority 0
C. spanning-tree vlan 200 root primary
D. spanning-tree vlan 200 priority 38813258
Correct Answer:
B. spanning-tree vlan 200 priority 0
Exam Question 598
Refer to the exhibit. A router received these five routes from different routing information sources. Which two routes does the router install in its routing table? (Choose two)
A. OSPF route 10.0.0.0/30
B. IBGP route 10.0.0.0/30
C. OSPF route 10.0.0.0/16
D. EIGRP route 10.0.0.1/32
E. RIP route 10.0.0.0/30
Correct Answer:
A. OSPF route 10.0.0.0/30
D. EIGRP route 10.0.0.1/32
Exam Question 599
Refer to the exhibit. The loopback1 interface of the Atlanta router must reach the loopback3 interface of the Washington router. Which two static host routes must be configured on the New York router? (Choose two.)
A. ipv6 route 2000::3/128 s0/0/0
B. ipv6 route 2000::1/128 s0/0/1
C. ipv6 route 2000::1/128 2012::1
D. ipv6 route 2000::1/128 2012::2
E. ipv6 route 2000::3/128 2023::3
Correct Answer:
C. ipv6 route 2000::1/128 2012::1
E. ipv6 route 2000::3/128 2023::3
Exam Question 600
Refer to the exhibit. After the configuration is applied, the two routers fail to establish an OSPF neighbor relationship. What is the reason for the problem?
A. The OSPF process IDs are mismatched
B. The network statement on Router1 is misconfigured
C. Router2 is using the default hello timer
D. The OSPF router IDs are mismatched
Correct Answer:
C. Router2 is using the default hello timer