The latest Cisco Certified Network Associate 200-301 CCNA certification actual real practice exam question and answer (Q&A) dumps are available free, which are helpful for you to pass the Cisco Certified Network Associate 200-301 CCNA exam and earn Cisco Certified Network Associate 200-301 CCNA certification.
Exam Question 581
A manager asks a network engineer to advise which cloud service models are used so employees do not have to waste their time installing, managing, and updating software that is only used occasionally. Which cloud service model does the engineer recommend?
A. infrastructure-as-a-service
B. platform-as-a-service
C. business process as service to support different types of service
D. software-as-a-service
Correct Answer:
D. software-as-a-service
Exam Question 582
Refer to the exhibit. Which action do the switches take on the trunk link?
A. The trunk does not form, and the ports go into an err-disabled status.
B. The trunk forms, but the mismatched native VLANs are merged into a single broadcast domain.
C. The trunk forms, but VLAN 99 and VLAN 999 are in a shutdown state.
D. The trunk does not form, but VLAN 99 and VLAN 999 are allowed to traverse the link.
Correct Answer:
B. The trunk forms, but the mismatched native VLANs are merged into a single broadcast domain.
Answer Description:
The trunk still forms with mismatched native VLANs and the traffic can actually flow between mismatched switches. But it is absolutely necessary that the native VLANs on both ends of a trunk link match; otherwise a native VLAN mismatch occurs, causing the two VLANs to effectively merge. For example with the above configuration, SW1 would send untagged frames for VLAN 999. SW2 receives them but would think they are for VLAN 99 so we can say these two VLANs are merged.
Exam Question 583
An engineer needs to configure LLDP to send the port description time length value (TLV). Which command sequence must be implemented?
A. switch(config-if)#lldp port-description
B. switch#lldp port-description
C. switch(config-line)#lldp port-description
D. switch(config)#lldp port-description
Correct Answer:
D. switch(config)#lldp port-description
Exam Question 584
Refer to the exhibit. An administrator is tasked with configuring a voice VLAN. What is the expected outcome when a Cisco phone is connected to the GigabitEthernet 3/1/4 port on a switch?
A. The phone and a workstation that is connected to the phone do not have VLAN connectivity.
B. The phone sends and receives data in VLAN 50, but a workstation connected to the phone sends and receives data in VLAN 1.
C. The phone sends and receives data in VLAN 50, but a workstation connected to the phone has no VLAN connectivity.
D. The phone and a workstation that is connected to the phone send and receive data in VLAN 50.
Correct Answer:
B. The phone sends and receives data in VLAN 50, but a workstation connected to the phone sends and receives data in VLAN 1.
Exam Question 585
Which two VLAN IDs indicate a default VLAN? (Choose two.)
A. 0
B. 1
C. 1005
D. 1006
E. 4096
Correct Answer:
B. 1
C. 1005
Answer Description:
VLAN 1 is a system default VLAN, you can use this VLAN but you cannot delete it. By default VLAN 1 is use for every port on the switch. Standard VLAN range from 1002-1005 it’s Cisco default for FDDI and Token Ring. You cannot delete VLANs 1002-1005. Mostly we don’t use VLAN in this range.
Exam Question 586
Refer to the exhibit. How will switch SW2 handle traffic from VLAN 10 on SW1?
A. It sends the traffic to VLAN 10.
B. It sends the traffic to VLAN 100.
C. It drops the traffic.
D. It sends the traffic to VLAN 1.
Correct Answer:
B. It sends the traffic to VLAN 100.
Answer Description:
Since SW-1 is configured native VLAN is VLAN10, so traffic coming out of VLAN-10 is untagged, & goes directly to SW-2 Native VLAN: VLAN100, due to VLAN mismatch.
Exam Question 587
Which statement about Cisco Discovery Protocol is true?
A. It is a Cisco-proprietary protocol.
B. It runs on the network layer.
C. It can discover information from routers, firewalls, and switches.
D. It runs on the physical layer and the data link layer.
Correct Answer:
A. It is a Cisco-proprietary protocol.
Exam Question 588
What are two reasons a network administrator would use CDP? (Choose two.)
A. to verify the type of cable interconnecting two devices
B. to determine the status of network services on a remote device
C. to obtain VLAN information from directly connected switches
D. to verify Layer 2 connectivity between two devices when Layer 3 fails
E. to obtain the IP address of a connected device in order to telnet to the device
F. to determine the status of the routing protocols between directly connected routers
Correct Answer:
D. to verify Layer 2 connectivity between two devices when Layer 3 fails
E. to obtain the IP address of a connected device in order to telnet to the device
Exam Question 589
The SW1 interface g0/1 is in the down/down state. Which two configurations are valid reasons for the interface condition? (Choose two.)
A. There is a protocol mismatch
B. There is a duplex mismatch
C. The interface is shut down
D. The interface is error-disabled
E. There is a speed mismatch
Correct Answer:
C. The interface is shut down
D. The interface is error-disabled
Exam Question 590
Which protocol prompts the Wireless LAN Controller to generate its own local web administration SSL certificate for GUI access?
A. RADIUS
B. HTTPS
C. TACACS+
D. HTTP
Correct Answer:
B. HTTPS
Answer Description:
You can protect communication with the GUI by enabling HTTPS. HTTPS protects HTTP browser sessions by using the Secure Sockets Layer (SSL) protocol. When you enable HTTPS, the controller generates its own local web administration SSL certificate and automatically applies it to the GUI. You also have the option of downloading an externally generated certificate.