Is your Razer Barracuda X headset not charging properly? Follow these simple steps to get your headset back to its optimal charging performance:
Table of Contents
Solution 1: Check the charging cable and port
- Ensure the charging cable is working properly and plugged into the correct port.
- Use a spare charging cable to rule out any issues with the current one.
- Verify that the charging port on the headset is not loose or damaged.
Solution 2: Use the recommended charging cable
- Stick to the USB-A to USB-C charging cable that came with Razer Barracuda X headset.
- Avoid using an e-marker USB-C to USB-C cable to prevent compatibility issues.
- Stick to the recommended charging cable to ensure reliable and consistent charging performance for the headset.
Solution 3: Monitor the charging status
Check the device’s status in the Razer Synapse or Audio app to verify if the headset is charging correctly. Keep an eye on the charging status to ensure it continues charging properly.
Solution 4: Turn on the headset after charging
Plug in the headset for charging and immediately turn it on for a few seconds to display the accurate charge level. If the cable is unplugged, reconnect it and turn on the headset to ensure the correct battery level is shown.
Solution 5: Use a comprehensive charging process
- Charge the Barracuda X for 3 to 5 minutes.
- Turn on the headset while it’s charging or not.
- Connect the headset to your phone via Bluetooth.
- Open the Razer Audio app to confirm the battery reaches 100%.
- Unplug the headset once it’s fully charged.
- Test the headset by turning it on and off to verify if the battery level changes.
- If the battery level does not update as expected, repeat the process.
By following this guide, you’ll be able to supercharge Razer Barracuda X headset and get back to enjoying your immersive gaming sessions without any charging issues holding you back!