How to Fix Black Screen Issues with NVIDIA GPUs (Especially RTX 50 Series)

Will These Expert Solutions End Black Screen Problems on Your RTX 50 GPU? Is Your NVIDIA RTX 50 Series Suffering Black Screens? Try These Proven Fixes

Black screen and display flickering problems are increasingly reported with NVIDIA’s RTX 50 series GPUs, including scenarios where audio continues but the display goes blank or flickers. These issues often surface during gaming or after recent driver updates.

Solution 1: Disable G-Sync

Temporarily turn off G-Sync in the NVIDIA Control Panel. Some users report this immediately resolves black screen and flickering, though it may reduce adaptive sync benefits.

Solution 2: Clean Install Stable Drivers

1. Boot into Safe Mode.
2. Use Display Driver Uninstaller (DDU) to completely remove existing NVIDIA drivers.
3. Download and install a stable driver version (for example, the December 566 release is noted for stability with RTX 50 series).
4. Restart and test for improvements.

Solution 3: System Restore

Use Windows System Restore to roll back to a restore point before the problematic driver or update was installed.

Solution 4: Upgrade Display Cables

Replace your DisplayPort or HDMI cable with a certified high-quality version (such as DP 2.1 or HDMI 2.1). Poor-quality cables can cause signal loss, especially at higher refresh rates or resolutions.

Solution 5: Adjust Multiple Display Settings

For multi-monitor setups, set the GPU (not the display) to handle scaling in the NVIDIA Control Panel.

When gaming, use the Windows + P shortcut and select “PC screen only” to isolate output to a single display.

Solution 6: Tweak HDR and Refresh Rate

If using an HDR display, try disabling HDR in Windows settings. Lower the refresh rate to 120Hz or below to test for stability improvements.

Additional Tips

• Monitor NVIDIA forums and driver release notes for any hotfixes or updates addressing RTX 50 series display issues.
• Always ensure your system BIOS and GPU firmware are up to date.