How Do You Complete VR Module Job in Uncle Chop’s Rocket Shop?

Struggling with Uncle Chop’s Rocket Shop VR Module? Here’s the Fix!

Let me break this down for you step by step. It’s not as tricky as it seems, but you’ve got to keep your focus.

Step 1: Adjusting the Crosshairs

1. Start by moving the dials to aim the crosshair directly at Wilburr’s eyes.
2. The green crosshair should always be on the left, and magenta (or pink) goes on the right.
3. Once you’ve locked onto his eyes, hit that switch.

Step 2: Handling the Four Switches

1. Now, shift your attention to the four switches below.
2. Press them one by one, left to right, but here’s the catch, only press when the bar is perfectly aligned under each switch.
3. After this, everything should be in place. Ready? Press the big GO button and dive into the VR realm!

Step 3: Swapping “UP” and “DOWN” Inputs

1. One VR realm throws a curveball, it asks you to swap “UP” and “DOWN” inputs.
2. Look for two screws at the bottom left and right of the panel. Unscrew them carefully.
3. Open up the panel and swap the wires inside. Just switch them around.
4. You can leave the wires swapped after completing this stage; it won’t mess anything up later.

Once you’ve followed these steps, you’re all set! The VR module job is complete, and you’re ready to move on to whatever Uncle Chop throws at you next. Keep calm, stay sharp, and treat every step like solving a little puzzle. You’ve got this!