Description This article describes how to forward Multicast traffic from one managed FortiAP to another managed FortiAP in tunnel mode. Scope FortiGate managing 2 FortiAPs. The FortiAPs have SSID: ‘tunnel’ in Tunnel mode with PC1: 10.233.0.3 connected to FAP1 and PC2: 10.233.0.4 connected to FAP2. PC1 is generating MultiCast traffic (10.233.0.3 –> 234.5.6.7) and PC2 …
This article describes how to identify and fix the cause of a high channel utilization being reported on FortiAP (Managed by FortiGate). Scope FortiGate, FortiAP-U, FortiAP-W2 Solution Identify the device causing interference and take the necessary action, such as removing the device from the RF environment. Follow the steps below to check the spectrum usage …
This article describes how to change FortiAP-U image from FortiGate to FortiWLC. Step 1: Get CLI access to the FortiAP which is booting with FortiGate image. Step 2: Execute the below command: PU431F5xxxxxx# factoryreset This operation will reset the system to factory default!! Do you want to continue? (y/n) Step 3: The FortiAP will go …
This article describes about the upgrading steps of FAP-U431/U433 from 6.2.1 to 6.2.2. FAP-U431F and FAP-U433F firmware version 6.2.2 requires a mandatory change in data partitions, so they can NOT be directly upgraded from 6.2.1 to 6.2.2. Scope FAPU431/U433F version 6.2.1 Solution Step 1: Ensure the FAP-U431F and FAP-U433F units are running FAP-U6.2.1 GA build …
